What should I do before I try gripper shelf liner or a silicone trivet?
- Dining Chair Pads - First place the cushion in the seat, with the back of the cushion pushed against the back of the chair, or within 1"-2". Then tie the pad securely to the chair back, rungs, or legs, finishing with a knot or a bow. Lift the seat cushion and place a sheet of gripper shelf liner, carpet gripper pad, or silicone trivet under the cushion.
- Rocking Chair Cushions - For shipping purposes, the seat and back cushions will be tied to each other when they arrive; first, untie the cushions from each other. Then place the seat cushion and tie it to the back of the seat posts or rungs with a knot or a bow. Tie the top ties of the back cushion to the top posts or the headrest; tie the bottom ties of the back cushion to the lower posts or rungs; finish all ties with a knot or a bow. Lift the seat cushion and place a sheet of gripper shelf liner, carpet gripper pad, or silicone trivet under the cushion.
- Bar Stool Cushions - For shipping purposes, when the barstool cover arrives the drawstring will be pulled tight and tied. Untie the drawstring and loosen the yoke. Place a circle of gripper shelf liner or a silicone trivet on the seat, then place the barstool cushion on top of the gripper. Pull the yoke down over the seat of the stool and tighten the drawstring under the seat until the yoke is wrapped around and under the seat and almost fully tightened. Push the yoke around to evenly distribute the gathers around the seat. Pull the drawstring fully tight and keep it pinched closed while tying a knot or a bow (it helps to have a friend, but one person can manage it on their own).
Shop Barnett Home Decor Dining Chair Pads with Ties
